2.4" TFT 320*240 With SD Touch Module

Product | TFT Module | 2.4" TFT 320*240 With SD Touch Module

next item previous item go back

Product ID :41969

Quantity :

Hits :

RoHS:

Price : US$16.98

Loading ...

add to wish list

Description
Comments
Write Review
Video

2.4" TFT 320*240 With SD Touch Module

1、Description :

2.4-inch TFT Color LCD Module is a TFT LCD Screen Module, 40pins interface, not just a LCD break but include the Touch, SD card and Flash design. So it’s a powerful extension module for your project.

This item is 240374PQ. It’s a 65K color, 320*240 (resolution), 2.4 inch TFT LCD screen. The LCD has a wide viewing angle, the contrast is also very suitable.

The Screen include a controller ILI9341 or ILI9325 (Custom Made), it’s a support 8/16bit data interface, easy to drive by many MCU like Arduino、STM32 ,AVR and 8051.

It is designed with a touch controller in it. The touch IC is XPT2046, and touch interface is included in the 40 pins breakout. We will offer two version of it, one is with touch screen and touch controller, another is without the touch function, it will just use as a LCD screen for display- so it will be inexpensive than former.

Another useful extension in this item is the SD Card socket. It use the SPI mode to operate the SD card, the SPI interface include in the 40pins breakout.

There is a reserve extension design in it, that’s the external flash. It’s leave the pad and the pins out for the SST25VF016B Flash. So when you need, you can easily add a external flash for your project.

It layout a 40 pins interface for your project, the interface include LCD bus, SD card bus, Touch screen bus and the Flash bus.

2、Picture Display :

3、 Handwriting :

Module size 75 * 53mm.

There are two 3mm mounting holes and interface is spacing 2.54mm 2*20 pins.

4、Interface Definition :

5、Pin Definition :

The pins named with “D_” is the touch bus , the pins named with “SD_” is SD bus, the pins named with “F_” is Flash bus.

It is work at 3.3v DC, if you need to connect the module with the 5v voltage I/O , you need to add the 30k and 20k resistors to reduce voltage.

You can switch 8/16 mode through j3 interface as following :

If you short circuit j3 interface at the back of the PCB module, then it work as 16bit mode

If you do not short circuit j3 interface at the back of the PCB module, then it work as 8bit mode

When you use the 8bit mode , the DB8-DB15 is used , please remember to pull the DB0-DB7 to GND or empty.

Please notice that It support that it can be default used as the 8 bit mode.

6、Dimensions :

7、Click to Download the TFT Document Zip

The Document Zip include as below :

   * 240374PQ.pdf                          Screen datasheet
    * ILI9325 / ILI9341.pdf Screen controller datasheet
    * XPT2046.pdf                                   Touch controller datasheet
    * Spe.pdf Size of the TFT
    * Interface Port.jpg Interface Port Defination
    * PinOut.jpg Pin map of the 40 pins interface
    * Schematic Diagram.pdf Schematic Diagram.pdf
    * Test Code.pdf Test Code.pdf
    * Lib_UTFT.zip                                    Library of The TFT

We will send free gift together with this TFT: Universal resistive touch pen

下载pdf文档资料.pdf

Write a review

Loading ...

Your e-mail*	Required
Enter Your Friend's E-mail Address(es)*	Required Please separate emails by comma. e.g. anne@example.com,sam@example.com
Subject*	Required
Message*	Required

Related Items