Description:

This is standard 2.54mm Arduino Anti-Reverse I2C/COM Connector And Cable kit, which include one Arduino Anti-Reverse I2C/COM Cable and one Anti-Reverse I2C/COM Connector.

You can use this kit to make your own gadgets with I2C/COM interface according to your requirement, and help you to save some connection work.

Arduino Anti-Reverse I2C/COM Cable

Designed for Arduino Sensor Shield and Chassis. Firm connectibity on both ends, and basic Analog/Digtal module connections.

This cable is used to help Arduino sensor shield to connect smoothly with other electronic modules with I2C/COM interface.

Standard 2.54mm Anti-Reverse interface.

The length is 30cm.

The pin is 4 pins.

There is one tips when you use this kind of cable, if this cable color order can not match your requirement, please pull out the cable from one or two terminal with the help of assistant tools such as needle, and adjust the cable color order according to your requirement, then plug the cable into the corresponding terminal, your cable can match your requirement again !

This kind of cable is connected as A-A、B-B、C-C、D-D, shown as below：

 

 

Anti-Reverse I2C/COM Connector

Standard 2.54mm Anti-Reverse interface.

The pin is 4 pins.


Application
 

 

Tell a friend

Your e-mail*	Required
Enter Your Friend's E-mail Address(es)*	Required Please separate emails by comma. e.g. anne@example.com,sam@example.com
Subject*	Required
Message*	Required