PWM to Voltage Converter Module
Parameter
1、Working Voltage: 9V～24V
2、Signal Input Voltage Range: 4～24V
3、Signal Input Frequency Range: 50Hz～10KHz
4、Signal Input PWM Range: 0～100%
5、Output Voltage: 0.00V ～ 5.00V/0.00V～10.00V
6、Input Mode: S1 of this module: Open Circuit
7、Output Mode: S2 of this module: Open Circuit (output 0.00V～5.00V);
Short Circuit (output 0.00V～10.00V);
Open circuit by default
8、Application: convert PWM into voltage signal; remote data acquisition and control equipment
9、Size: 26mm(L) * 23mm(W) * 10mm(H)
Pin Definition
24V: Vcc (9V~24V)
G: GND
IN: Signal Input Positive Pole
G: Signal Input Negative Pole
OUT: Signal Output (0.00V～5.00V / 0.00V～10.00V)
G: GND
(Notice: when output 0.00V ~ 10.00V, the Vcc recommend 15V).
When output 0.00V～5.00V, the resolution ratio is 0.050 V/D
When output 0.00V～10.00V, the resolution ratio is 0.100 V/D
Calculate the PWM = Output Voltage / Resolution Ratio
