Xbee Shield V3.0 -Arduino Compatible
This Arduino XBee module include one piece of expansion board of arduino：this Arduino XBee module, we can achieve a simple two crunodal ZigBee network, achieve wireless communication between Arduino. ZigBee also support complex network organizing by many crunodes.
XBee module need corresponding set before working.we can finish setting by X-CTU link Arduino XBee shield to Arduino, then place two jumper wire of Arduino XBee sheield on one side of USB, if this X-CTU can deploy XBeeby module by USB of Arduino.
After linking Arduino to PC by USB cable, run X-CTU sortware. Then choose corresponding communication port in “PC Settings”, and set parameter. XBee module tolerant set is:9600,8N1.
Turn to “Modem Configuration”. click “Read” in “Modem Parameters and Firmware” read current parameter of XBee module, then read change “Channel”to “C” in “Networking & Security”, change“PAN ID” to “1234”.
Another Arduino XBee module are set as the same. After two of Arduino XBee finish setting, run two X-CTU and chose different communication port in“PC Settings”control two Arduino XBee modules separately.
In “Terminal”of X-CTU, we need to input data of XBee module by hands, after receiving these data, it is sent to another XBee module automatically, and display in the “Terminal”of X-CTU. Blue standard for emitting data，red standard for receiving data.
