Z-Wave Wireless Module -Arduino Compatible
Description
The tri-band transceiver, operating frequency of the international ISM band 433/868~915MHz GMSK modulation, anti-interference ability, especially suitable for industrial control applications using the DSS PLL frequency synthesizer technology, and excellent frequency stability and high sensitivity-100dBm low operating voltage (2.7V), small power consumption, standby only 1uA, to meet the requirements of low powerdevices, the maximum transmit power up to 10dBm with multiple channels (up to 170), in particular, to meet the special needs multi-channel work occasions, the work rate up to 76.8 Kbps.
Parameter
1、Frequency band: 433/868~915MHz
2、Channel number: 170
3、Function: transmitter / receiver
4、Frequency stabilization method: PLL
5、Modulation mode: the FSK / GMSK
6、Maximum output power: 10dBm
7、Sensitivity:-100dBm
8、Maximum operating rate: 76.8Kbit / s
9、Working voltage: 2.7 - 3 .3 V
Pin Definition
VCC ---- Power supply.
TXE ---- RF module mode selecting.
CE ---- Enable RF module for transmit and receive.
PWR ---- Power up chip.
CLK ---- Output clock, divided crystal oscillator full swing clock.
CD ---- Carrier detect.
AM ---- Address matched.
DR ---- Receive and transmit ready.
MISO ---- SPI master input slave output.
MOSI ---- SPI mater output slave input.
SCK ---- SPI clock.
CSN ---- SPI enable.
GND ---- Ground
GND ---- Ground
Connection With Arduino
Click to Download The Zip Document
1、Manual
2、Library for Arduino
